8.7 - Corrective actions
8.7.1 When a nonconformity occurs, the laboratory shall:
a) react to the nonconformity and, as applicable:
- take action to control and correct it; and
- deal with the consequences;
b) evaluate the need for action to eliminate the cause(s) of the nonconformity,
in order that it does not recur or occur elsewhere, by:
- reviewing and analyzing the nonconformity;
- determining and analyzing the causes of the nonconformity; and
- determining whether similar nonconformities exist or could potentially
occur;
c) implement any action needed;
d) review the effectiveness of any corrective action taken;
e) update risks and opportunities determined during planning, if necessary; and
f) make changes to the management system, if necessary.
8.7.2 Corrective actions shall be appropriate to the effects of the
nonconformities encountered.
8.7.3 The laboratory shall retain records as evidence of:
a) the nature of the nonconformities, the cause(s), and any subsequent actions taken; and
b) the results of any corrective action.
![]()
Corrective action is one of the fundamental elements of quality management,
and it is essential to maintaining the CAB’s continual improvement.
The organization must systematically analyze all types of issues encountered,
perform a review of previous occurrences to ensure that the issue has
not already occurred and does not impact other services, and determine
the root causes of nonconformities.
It must ensure that the issue has been corrected through specific indicators.
In other words, your customers have confidence in the organization’s
ability to consistently provide services that meet their requirements.
- The CAB must respond to nonconformities, including those resulting
from customer complaints.
- The CAB must initiate action to control and correct the nonconformity.
- The CAB must analyze and respond to the consequences of the nonconformity.
- The CAB must evaluate the need for action to eliminate the cause or
causes of the nonconformity so that it does not recur or occur elsewhere.
- If a customer complaint is not taken into account because its review
shows that it is not justified or is not the responsibility of the CAB,
this decision must be justified with supporting evidence.
- The CAB must review and analyze the nonconformity.
- The CAB must identify the root cause of the nonconformity.
Tools such as the 5M, 5 Whys, and/or 8D should help
you determine root causes. This exercise is often easier to perform
with personnel who are independent from the activity or department concerned.
Root cause analysis is the most difficult aspect of the corrective action
process and should be used as a continual improvement tool, which may
reduce or eliminate the likelihood of a potential nonconformity.
Understanding why an event occurred is key to developing effective corrective
actions.
In some cases, the cause is singular and easily identifiable; in most
cases, there may be several causes.
For this reason, there is no “recipe” that can be followed.
Although it is impossible to create a procedure that would apply to
every scenario, there are a few basic principles that can be used, the
most important being that the cause must answer the question:
Why did this nonconformity occur?
Other points to consider:
• The formalization of root causes that are essentially a restatement
of the problem does not provide any new information, is of little use,
and is not considered an acceptable response during the evaluation.
In such cases, the 5 Whys method should be used to determine the root
cause.
• Each problem must be evaluated independently.
For example, at the conclusion of an evaluation in which eight nonconformities
were identified, it is determined that the root cause of six of the
eight nonconformities relates to employee training.
In this example, further investigation of the employee training program
would be appropriate and should be reflected in the response to the
evaluator. The investigation that begins by asking “Why did this
nonconformity occur?” provides the reason why the nonconformity
occurred.
An adequate root cause investigation consists of asking “Why did
this happen?” until no further reason can be identified.
At that point, you can be reasonably assured that you have isolated
the core issue.
• The CAB must initiate actions to eliminate the root cause(s).
• The CAB must determine whether similar nonconformities exist
or could potentially occur.
• The CAB must initiate and implement the necessary actions to
correct the nonconformity.
• The CAB must review the effectiveness of the actions taken to
correct the nonconformity.
• The CAB must update the risks and opportunities associated with
corrective actions during their planning.
• The correction must be appropriate to the consequences of the
nonconformity.
There is no need to implement actions with significant
consequences for minor nonconformities that have no impact on the integrity
of the results and do not affect your relationship with the client concerned,
such as a spelling mistake or an error in transcribing a batch number.
The report will be corrected within a short timeframe and resent to
the client.
The CAB must retain all information related to the nonconformity as
evidence of:
• The nature of the nonconformities
• Any subsequent actions taken
• The results of any corrective action
Addressing risks and opportunities:
The results of the analysis and understanding of the root cause of the
nonconformity may suggest new risks or opportunities within the quality
management system that need to be addressed.
When associating risks with the nonconformity, you must take into account
the significance of the nonconformity, its frequency, and the extent
to which QMS personnel are able to identify it.
The main objective is to promote a proactive approach that enables the
identification and management of potential quality issues before the
nonconformity occurs.
Risks to the QMS are associated with a nonconformity when it creates
a situation in which:
• The QMS will not achieve its quality objectives;
• The desired results of the process concerned may not be achieved;
• Undesirable or secondary effects may occur;
• Customer satisfaction may be negatively affected.